Submersible pump Tsurumi LSC 1.4S
Catalogue number: ILCTDCRASS
Gross price
977,63 €
Net price: 1 019,00 € 794,82 €
Lowest price 30 days before the discount: 1 077,90 € gross
Availability: Available for order
Shipping time: ~3 daysi
The shipping time for products is indicative and subject to change.
Applies to working days from the moment of accepting the order for processing.
Delivery price (in Poland): on request
Warranty: 1 year
Comments: 0
Add commentiThe Seller does not verify the added statements (opinions, comments or any other statements), in particular, does not verify them in terms of whether they come from Customers who have purchased and used the Products.Related products
Hose Bogdan Gil H 25-15ŁA 15 m (diameter 25 mm)
Hose Bogdan Gil H 25-15ŁA 15 m (diameter 25 mm)Gross price
Hose Bogdan Gil H 25-20ŁA 20 m (diameter 25 mm)
Hose Bogdan Gil H 25-20ŁA 20 m (diameter 25 mm)Gross price
The LSC 1.4 S Tsurumi Pump is a pump that is used when pumping residual water up to 1 mm. Ideal for drainage of flat surfaces where there are no drainage areas such as roofs, parking lots, garages, roads, swimming pools. It can even remove water from a small puddle.
Variant description: No level regulator
Technical characteristics
Pressure resistance
10 m
Maximum solid handling
6 mm
Maximum performance
170 l/min
Maximum height lift
11 m
Engine power
0,48 kW
Connector diameter
25 mm
Application
Dirty water
Tension
230 V (single-phase)
Frequency
50 Hz
Current
2,9 A (rated)
Cable length
10 m
Weight
11 kg
DETAILED SPECIFICATION
| Submersible pump Tsurumi | ||
| Specification | Pump | |
| Components | Impeller | Semi-vortex impeller |
| Bearings | Shielded ball bearings | |
| Shaft seal | Double mechanical seal | |
| Material | Impeller | Urethane rubber |
| Casing | Ethylene propylene rubber | |
| Suction plate | Steelplate, urethane rubber | |
| Shaft seal | Silicon carbide in oil bath | |
| Specification | Motor | |
| Material | Casing | Aluminium die casting |
| Shaft | Stainless steel EN-X6CR13 | |
| Cable | Rubber − H07RN-F | |
| Frequency | 50 Hz | |
| Voltage | 230 V (single phase) | |
| Built-in motor protection | Miniature protector | |
| Type | Induction motor, 2 poles | |
| Insulation | Insulation class E | |
| Lubrication | Turbine oil − ISOVG32 | |
| Protection | IP 68 | |
| Specification | Pumping Fluid | |
| Medium type | Cleaning water, water on floor, puddles | |
| Temperature | 0 − 40° C | |
| Specification | Other | |
| ø Discharge bore mm | 25 mm | |
| Discharge Connection | Hose coupling | |
advantages
- Water outlet facing upwards – the water flows between the jacket and the engine. The pump can operate at a low level and also when the air sucks,
- Double mechanical seal with silicon carbide, such as in massive construction pumps,
- The pump set on a smooth surface will leave a layer of only 1 mm of water. The check valve above the inlet cage stops the water in the pump when it is turned off or suspended,
- Possible delivery with level regulator available in LSCE 1.4 S model. No unique installation is required, and the pump is immediately ready for operation when connected to the power
- Impurities do not interfere with the electrode because it is sunk in synthetic resin and protected by a rubber shield.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
We are getting better and better for you and your opinion will definitely help us to provide you with better services